English
Currency EUR
Gas signaling device C-ARTOL. PASHK.413223.001 TU – "MAGNITO-KONTAKT" Ltd | all.biz
Buy Gas signaling device C-ARTOL. PASHK.413223.001 TU
Gas signaling device C-ARTOL. PASHK.413223.001 TU

Gas signaling device C-ARTOL. PASHK.413223.001 TU

In stock
Price:
25.32 EUR
Wholesale:
  • 20.72 EUR/pcs  - from 2 pcs
Payment:
  • Cash,
  • Invoice payment,
  • Cash on delivery
  • In detail
Shipping:
  • Customer pickup,
  • Courier,
  • Transport company
  • In detail
Seller
Russia, Rjazan
(View map)
+7(4 
Display phones
Less than 1 year old on Allbiz
Technical characteristics
  • BrandНПП «МАГНИТО-КОНТАКТ»
  • Country of manufactureRussia
Description

Data sheet (operation manual)

Gas alarm C - ARTOL is designed for:

  • detection of hazardous concentrations in the air of combustible gases, natural gas - GOST 5542 or liquefied gas - GOST 20448 - 90, in industrial or residential premises;
  • issuing light and sound signals about reaching the maximum permissible concentration of combustible gases in the air;
  • shutting off the gas supply pipeline with a manipulator, or an electromagnetic pulse valve, or issuing an alarm notification to a centralized control panel (CCP) or a receiving and control device (PPK).

Purpose of the product

ISP.01M ISP.02M ISP.03M ISP.04M ISP.05M ISP.06M ISP.07M
Created for 1) detection of a dangerous concentration of flammable gases (methane or propane - butane mixture) in the air in industrial or residential premises;
2) issuance of light and sound signals about the achievement of the maximum permissible concentrations of combustible gases in the air;
3) blocking the gas supply pipeline with a manipulator or an electromagnetic pulse valve with a supply voltage of 12V.
1) detection of a dangerous concentration of flammable gases (methane or propane - butane mixture) in the air in industrial or residential premises;
2) issuing light and sound signals about reaching the maximum permissible concentrations of combustible gases in the air.
1) detection of a dangerous concentration of flammable gases (methane or propane - butane mixture) in the air in industrial or residential premises;
2) issuing light and sound signals about the achievement of maximum permissible concentrations of combustible gases in the air, as well as issuing an alarm notification to the centralized control panel (CCP) or the receiving and control device (PPC).
1) detection of a dangerous concentration of flammable gases (methane or propane - butane mixture) in the air in industrial or residential premises;
2) issuance of light and sound signals about the achievement of the maximum permissible concentrations of combustible gases in the air;
3) blocking the gas supply pipeline with a manipulator or an electromagnetic pulse valve with a supply voltage of 220V.
1) detection of a dangerous concentration of flammable gases (methane or propane - butane mixture) in the air in industrial or residential premises;
2) issuance of light and sound signals about the achievement of the maximum permissible concentrations of combustible gases in the air;
3) перекрытия трубопровода подачи газа манипулятором, либо электромагнитным импульсным клапаном с напряжением питания 220В, а также выдачи извещения о тревоге на пульт централизованного управления (ПЦН) или прибор приемно - контрольный (ППК).
1) обнаружения опасной концентрации в воздухе горючих газов (метана или пропан - бутановой смеси) в производственных или жилых помещениях;
2) выдачи световых и звуковых сигналов о достижении предельно - допустимых концентраций горючих газов в воздухе;
3) перекрытия трубопровода подачи газа манипулятором, либо электромагнитным импульсным клапаном c напряжением питания 12В. , а также выдачи извещения о тревоге на пульт централизованного управления (ПЦН) или прибор приемно - контрольный (ППК).
1) обнаружения опасной концентрации в воздухе горючих газов (метана или пропан - бутановой смеси) в производственных или жилых помещениях;
2) выдачи световых и звуковых сигналов о достижении предельно - допустимых концентраций горючих газов в воздухе;
3) blocking the gas supply pipeline with a manipulator, or an electromagnetic pulse valve with a supply voltage of 12V and / or an electromagnetic pulse valve with a supply voltage of 220V, as well as issuing an alarm notification to a centralized control panel (CCP) or a receiving and control device (PPK).
Application The device can work both as a signaling device and in conjunction with external actuators. If the preset flammable gas concentration thresholds are exceeded, the ALARM indicator will turn red and a continuous sound signal will be generated, and a signal will be given to close the manipulator / valve through the OUT contacts. The device works as a signaling device. When the set thresholds for the concentration of combustible gas are exceeded, the ALARM indicator will turn red and a continuous sound signal will sound. The device can work both as a signaling device and in conjunction with external actuators. When the set thresholds for the concentration of combustible gas are exceeded, the ALARM indicator will turn red, a continuous sound signal will be given and the contacts of the PRIBOR output relay will close. The device can work both as a signaling device and in conjunction with external actuators. If the preset flammable gas concentration thresholds are exceeded, the ALARM indicator will turn red and a continuous sound signal will be generated, and a signal will be given to close the valve through the NO / NC relay contacts. Устройство может работать как сигнализатор, так и совместно с внешними исполнительными устройствами. При превышении установленных порогов концентрации горючего газа, индикатор ТРЕВОГА загорится красным цветом и будет подаваться непрерывный звуковой сигнал, также будет подан сигнал на закрытие клапана через контакты реле NO/NC. и замкнутся контакты реле выхода PRIBOR. Устройство может работать как сигнализатор, так и совместно с внешними исполнительными устройствами. При превышении установленных порогов концентрации горючего газа, индикатор ТРЕВОГА загорится красным цветом и будет подаваться непрерывный звуковой сигнал, также будет подан сигнал на закрытие манипулятора/клапана через контакты OUT и замкнутся контакты реле выхода PRIBOR. The device can work both as a signaling device and in conjunction with external actuators. If the preset flammable gas concentration thresholds are exceeded, the ALARM indicator will turn red and a continuous sound signal will be generated, a signal will also be given to close the manipulator / valve through the OUT contacts, a signal to close the valve through the NO / NC relay contacts and the PRIBOR output relay contacts will close.

Main technical characteristics

The signaling device is a plastic case with a printed circuit board located inside, sensors, a sounder and terminal blocks for connecting a power supply and:


- external actuator / manipulator / valve (for isp.01M, 04M, 05M, 06M, 07M)
- alarm loop (for isp.03M, 05M, 06M, 07M).

 

GAS ALARM C-ARTOL

The signaling device is configured to issue an alarm when the concentration of combustible gases (methane or propane - butane mixture) in the air is equal to 4.4% of LEL (lower concentration limit of flame propagation). For CH4 methane, this response threshold corresponds to the mass concentration of methane in the air equal to 29 mg / l (GOST 30852.19 - 2002).

The signaling device is powered from a 12 V DC source.

The current consumed by the signaling device in standby mode is no more than 200 mA.

The current consumed by the signaling device in the alarm mode is no more than 300 mA.

Time of technical readiness of the signaling device for operation - no more than 60 s.

Alarm response time - no more than 15 s.

The volume level of the sound signal at a distance of 10 cm from the signaling device is not less than 82 dB.

The sound and light signals of the alarm operation remain after the end of exposure to a potentially dangerous gas concentration until the device is completely reset.

Light indication of the signaling device operating modes:

GAS ALARM C-ARTOL

Overall dimensions - Ø98x36 mm.

The mass of the signaling device is 0.3 kg.

Service life - 3 years.

The degree of protection of the enclosure of the signaling device is IP20 in accordance with GOST 14254.

Operating conditions: ambient temperature: from + 10 ° С to + 50 ° С, relative humidity: no more than 95% at a temperature of + 25 ° С.

Contents of delivery:

  • Signaling device.
  • Manual.

Principle of operation

Monitoring the concentration of methane, propane / butane and other combustible gases and vapors is based on a thermochemical principle, which determines the thermal effect of gas combustion on a heated catalytically active surface of a sensitive measuring element.

After the device is installed, 12V voltage must be applied to the " - U + " contacts, the device will enter the warm - up mode, and the POWER indicator will be on continuously. Upon completion of warming up (no more than 60 seconds), a short sound signal will be given and the device will go into standby mode of gas contamination control, while the POWER indicator will periodically blink. When the set thresholds for the concentration of combustible gas are exceeded, the ALARM indicator will turn red, a continuous sound signal will sound and:

- a signal will be given to close the manipulator / valve through the OUT contacts (for isp.01M, 06M, 07M),


- the contacts of the PRIBOR output relay are closed (for isp.03M, 05M, 06M, 07M),
- the relay contacts of the NO output are closed (for isp.04M, 05M, 07M),
- the relay contacts of the NC output will open (for isp.04M, 05M, 07M).

 

Installation instructions

When choosing a place to install the alarm, the following requirements must be observed:

  • the detector should be installed in places of possible gas leakage (near gas stoves, gas heating and heating devices, valves, valves, etc. );
  • when using an alarm device to detect an increased concentration of methane in the air, it must be installed above the places of possible gas leakage at a distance of at least 0.1 m from the ceiling;
  • when using a signaling device to detect an increased concentration of propane - butane mixture in the air, it must be installed below the places of possible gas leakage at a distance of no more than 0.5 m from the floor.
GAS ALARM C-ARTOL

Do not place the signaling device behind cabinets or other objects that block free access to it.

The room in which the alarm device is installed should be free of acid and alkali vapors, hydrogen sulfide, volatile organosilicon compounds. If the alarm was in freezing temperatures, then before turning it on, it must be kept for at least 4 hours at room temperature.

The signaling device is installed as follows:


- remove the cover of the signaling device and fix the base of the case with screws on the supporting surface using the mounting holes;
- lead the wires of power supply and external actuators / manipulators / valves (for isp.01M, 04M, 05M, 06M, 07M) or the alarm loop (for isp.03M, 05M, 06M, 07M) through the holes for entering wires at the base of the signaling device;
- fix the supplied wires in the terminals of the signaling device board.

 

Attention! ! ! Observing the polarity when connecting the power supply is MANDATORY!

Only for isp.03M, 05M, 06M, 07M:


The figure below shows a typical wiring diagram for signaling devices in a loop of a control panel (PPC).
R1 - end - of - line resistor from the PPK kit;
Rsh - shunt resistor;
GS1, GS - n - gas alarms with a normally open output circuit.
The need for installation and the Rsh rating are determined in accordance with the operating instructions on the PPK.

 

GAS ALARM C-ARTOL
Contact the seller
Gas signaling device C-ARTOL. PASHK.413223.001 TU
Gas signaling device C-ARTOL. PASHK.413223.001 TU
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Shipping method
Payment method
Compare0
ClearSelected items: 0